E510 Outdoor Access Point

Embedded 802.11ac Outdoor Wave 2 Wi-Fi AP with External BeamFlex+ Antennas

At stadiums, transit hubs, and other crowded outdoor public venues, users want the same fast, reliable Wi-Fi connectivity they expect in their homes or offices. However, designing an optimal wireless network without interfering with the aesthetics of the environment is a challenge in an outdoor environment.

The Ruckus E510 802.11ac Wave 2 access point (AP) is designed with a unique, diminutive two element enclosure which separates the RF components from the antenna module.

The E510 can be placed unobtrusively inside metal-shielded signage at a bus or train stations, and within a vending machine and display kiosk. The low profile antenna module can be located externally and linked to the RF module via weather proof cabling.

Deployment Flexibility
Separation of the antenna from the small radio component provides deployment flexibility that supports location constraints and aesthetic requirements.
Great Outdoor Wi-Fi
Deploy high-performance outdoor 802.11ac Wave 2 Wi-Fi in harshest of the outdoor environments with IP-67 weather proofing.
Stunning Wi-Fi Performance
Extends coverage with patented BeamFlex+™ adaptive antenna technology while mitigating interference by utilizing up to 64 directional antenna patterns.
Multiple Management Options
Manage the E510 with physical or virtual appliances.
Automate Optimal Throughput
ChannelFly™ dynamic channel technology uses machine learning to automatically find the least congested channels. You always get the highest throughput the band can support.
Serve More Devices
Connect more devices simultaneously with two MU-MIMO spatial streams and concurrent dual-band 2.4/5GHz radios while also enhancing non-Wave 2 device performance.
More Than Wi-Fi
Support services beyond Wi-Fi with the Ruckus IoT Suite, Cloudpath security and onboarding software, SPoT Wi-Fi locationing engine, and SCI network analytics.

Overview

  • Description
    Embedded 802.11ac Outdoor Wave 2 Wi-Fi AP with External BeamFlex+ Antennas
  • Maximum PHY Rate
    • 2.4GHz: 300Mbps
    • 5GHz: 867Mbps
  • Wi-Fi Technology
    • 802.11ac Wave 2 (5 GHz)
    • 802.11n (2.4 GHz)
  • Concurrent Users
    512
  • Radio Chains:Streams
    2x2:2
  • PD-MRC
    Yes
  • Rx Sensitivity
    -101 dbM
  • ChannelFly
    • Yes
  • Smart Meshing
    Yes
  • USB
    Yes
  • Ethernet Ports
    1x1 GbE

Wi-Fi

Wi-Fi Standards
IEEE 802.11a/b/g/n/ac Wave 2
Supported Rates
  • 802.11ac: 6.5 to 867Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80, NSS = 1 to 2 for VHT80)
  • 802.11n: 6.5 Mbps to 300Mbps (MCS0 to MCS15)
  • 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
  • 802.11b: 11, 5.5, 2 and 1 Mbps
Supported Channels
  • 2.4GHz: 1-13
  • 5GHz: 36-64, 100-144, 149-165
MIMO
  • 2x2 SU-MIMO
  • 2x2 MU-MIMO
Spatial Streams
2 for both SU-MIMO & MU-MIMO
Channelization
20, 40, 80 MHz
Security
  • WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i, Dynamic PSK
  • WIPS/WIDS
Other Wi-Fi Features
  • WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v
  • Hotspot, Hotspot 2.0
  • Captive Portal
  • WISPr

RF

Antenna type
  • External BeamFlex+ adaptive antennas with polarization diversity
  •   Adaptive antenna that provides upto 64 unique antenna patterns
Antenna gain (max)
2.4GHz: 2dBi 5GHz: 3dBi
Peak transmit power (aggregate across MIMO chains)
  • 2.4GHz: 22dBm
  • 5 GHz : 22dBm
Minimum receive sensitivity*
-101dBm
Frequency bands
  • ISM 2.4-2.484GHz
  • U-NII-1 5.15-5.25GHz
  • U-NII-2A 5.25-5.35GHz
  • U-NII-2C 5.47-5.725GHz
  • U-NII-3 5.725-5.85GHz
Notes
* Rx sensitivity varies by band, channel width and MCX rate.

2.4GHz Receive Sensitivity

MCS0 HT20
-95dBm
MCS7 HT20
-76dBm
MCS0 HT40
-92dBm
MCS7 HT40
-75dBm

5GHz Recieve Sensitivity

MCS0 VHT20
-95dBm
MCS7 VHT20
-77dBm
MCS0 VHT40
-93dBm
MCS7 VHT40
-74dBm
MCS9 VHT40
-68dBm
MCS0 VHT80
-90dBm
MCS7 VHT80
-71dBm
MCS9 VHT80
-65dBm

2.4GHz Tx Power Target

MCS0 HT20
22
MCS7 HT20
17
MCS0 HT40
22
MCS7 HT40
17

5GHz Tx Power Target

MCS0 VHT20
22
MCS7 VHT20
18
MCS9 VHT20
16.5
MCS0 VHT40, VHT80
21
MCS7 VHT40, VHT80
20
MSC9 VHT40, VHT80
18

Performance & Capacity

Peak PHY Rates
  • 2.4GHz: 300 Mbps
  • 5GHz: 867 Mbps
Client Capacity
Up to 512 clients per AP
SSID
Up to 31 per AP

Ruckus Radio Management

Antenna Optimization
  • BeamFlex+
  • Polarization Diversity with Maximal Ratio Combining (PD-MRC)
Wi-Fi Channel Management
  • ChannelFly
  • Background Scan Based
Client Density Management
  • Adaptive Band Balancing
  • Client Load Balancing
  • Airtime Fairness
  • Airtime-based WLAN Prioritization
SmartCast Quality of Service
  • QoS-based scheduling
  • Directed Multicast
  • L2/L3/L4 ACLs
Mobility
SmartRoam
Diagnostic Tools
  • Spectrum Analysis
  • SpeedFlex

Networking

Controller Platform Support
  • SmartZone
  • ZoneDirector
  • Standalone
Mesh
  • SmartMesh™ wireless meshing technology
  • Self-healing Mesh
IP
IPv4, IPv6
VLAN
  • 802.1Q (1 per BSSID or dynamic per use based on RADIUS)
  • VLAN Pooling
  • Port-based
802.1x
Authenticator & Supplicant
Tunnel
L2TP, GRE, soft-GRE
Policy Management Tools
  • Application Visibility and Control
  • Access Control Lists
  • Device Fingerprinting
  • Rate Limiting

Physical Interfaces

Ethernet
1 x 1GbE port, with M12 connector
USB
1 USB 2.0 port, Type A
Cable Modem
HW capability for Secure Boot

Physical Characteristics

Physical Size
  • RF Module: 21(L) x 14.2(W) x 3.3 (H) cm
  • RF Module: 8.3(L) x 5.6(W) x 1.3(H) in.
  • Antenna Module: 17.5(L) x 8.0(W) x 8.0(H)cm
  • Antenna Module: 6.9(L) x 3.15(W) x 3.15(H)in
Weight
  • RF Module : 900 gm
  • Antenna Module : 310 gm
Ingress Protection
IP-67
Mounting
  • Wall, Pole, Cabinet, DIN Rail and others
  • Pole Mount Diameter 1” to 2.5”
Operating Temperature
-40ºC (-40ºF) to 65ºC (145ºF)
Operating Humidity
Up to 95%, non-condensing

Power Consumption

802.3af (PoE)
12.35W max
DC (12-48VDC)
13.88W max

Certifications & Compliance

Wi-Fi Alliance*
  • Wi-Fi CERTIFIED™ a, b, g, n, ac
  • Passpoint®, Vantage
Standards Compliance*
  • EN 60950-1 Safety
  • EN 60601-1-2 Medical
  • EN 61000-4-2/3/5 Immunity
  • EN 50121-1 Railway EMC
  • EN 50121-4 Railway Immunity
  • IEC 61373 Railway Shock & Vibration
  • UL 2043 Plenum
  • EN 62311 Human Safety/RF Exposure
  • WEEE & RoHS
  • ISTA 2A Transportation
Notes
  • * For complete list of WFA certifications, please see Wi-Fi Alliance website.
  • * For current certification status, please see price list

Informazioni sul prodotto

Product Guide

WLAN Accessory Guide

Schede tecniche

Ruckus E510

Tecnologia di antenne adattive BeamFlex

Ottimizzazione delle prestazioni

Cosa significa:

Sistemi di antenne adattive intelligenti e compatti che contengono diversi elementi e manipolano elettricamente le proprietà dell'antenna al fine di creare percorsi ottimali per ciascun dispositivo con il quale comunicano.

Perché è importante:

Le antenne wireless tradizionali sono "omnidirezionali" (irradiano i segnali in tutte le direzioni) o "direzionali" (lo fanno in una direzione). La tecnologia di antenna adattiva Ruckus BeamFlex prevede un approccio più adattabile. La tecnologia BeamFlex consente al sistema di antenne in un AP Ruckus di analizzare e ottimizzare costantemente il proprio ambiente.

Il sistema di antenne riduce l'interferenza radio, il disturbo e i problemi di prestazioni della rete, oltre a migliorare i flussi delle applicazioni. I risultati?

  • Prestazioni e portata migliorate
  • Comunicazioni video e voce chiarissime
  • Efficienza energetica ottimizzata

BeamFlex+ è la versione migliorata della tecnologia di antenne adattive Ruckus BeamFlex e fornisce un supporto adattivo ai dispositivi mobili. BeamFlex+ consente alle antenne di adattarsi all'orientamento del dispositivo client, oltre alla sua posizione.

Video

File