H510 Indoor Access Point

Wall-Mounted 802.11ac Wave 2 Wi-Fi AP and Switch for Dense Client Environments

In hotels, apartment buildings, and other multi-dwelling structures, wireless connectivity can carry a hefty price tag. You need to connect a wide range of wired devices—IPTV set-top boxes, IP phones, networked minibars, and more—while delivering a great wireless experience.

The Ruckus H510 wall-mounted access point and switch makes it easy to meet the most demanding in-room connectivity requirements without breaking the bank. It features patented Ruckus technologies to deliver the industry’s highest-performing Wi-Fi, combined with four-ports of Gigabit Ethernet—all in a sleek, low-profile design that can be discretely installed over standard electrical outlets.

Deliver the full range of in-room services while dramatically reducing cabling, installation time, and construction costs.

Great All-In-One
Deliver great in-room Wi-Fi and enable converged IP services with 802.11ac Wave 2 speed and a built-in 4-port Gigabit Ethernet switch.
Stunning Wi-Fi Performance
Extends coverage with patented BeamFlex+TM adaptive antenna technology while mitigating interference by utilizing multi-directional antenna patterns.
Multiple Management Options
Manage the H510 from the cloud, with on-premises physical/virtual appliances, or without a controller.
Get Optimal Throughput
ChannelFly dynamic channel technology uses machine learning to automatically find the least congested channels. You always get the highest throughput the band can support.
Serve More Devices
Connect more devices simultaneously with two MU-MIMO spatial streams and concurrent dual-band 2.4/5GHz radios while enhancing non-Wave 2 device performance.
Support More Services
Multiple SSIDs and switch ports help support services such as VoIP, IPTV, and high-speed Internet access and in-room device connectivity.
Keep Existing Switches and Cables
Designed to operate on existing PoE switches and CAT 5e cabling to minimize costly upgrades.
More Than Wi-Fi
Enhance your network with Cloudpath security and management software, SPoT real-time Wi-Fi location engine and analytics software, and SCI network analytics.

Overview

  • Description
    Dual-band 802.11ac Wave 2 wall-mounted access point with 5 Gigabit Ethernet ports
  • Maximum PHY Rate
    867 Mbps (5GHz) 300 Mbps (2.4 GHz)
  • Wi-Fi Technology
    802.11ac (2.4/5GHz)
  • Concurrent Users
    100
  • Radio Chains:Streams
    2x2:2
  • BeamFlex Gains
    2dB
  • Max. Interference Mitigation
    5dB
  • PD-MRC
    Yes
  • Rx Sensitivity
    -99dBm
  • ChannelFly
    Yes
  • Smart Meshing
    Yes
  • USB
    Yes
  • Ethernet Ports
    5

Wi-Fi

Wi-Fi Standards
IEEE 802.11a/b/g/n/ac Wave 2
Supported Rates
  • 802.11ac: 6.5 to 867Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80)
  • 802.11n: 6.5Mbps to 300Mbps (MCS0 to MCS15)
  • 802.11a/g: 54, 48, 36, 24, 18, 12, 9 , 6Mbps
  • 802.11b: 11, 5.5, 2 and 1 Mbps
MIMO
  • 2x2 SU-MIMO
  • 2x2 MU-MIMO
Spatial Streams
2 Streams SU/MU-MIMO
Channelization
20, 40, 80MHz
Security
  • WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i, Dynamic PSK
  • WIPS/WIDS
Other Wi-Fi Features
  • WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v
  • Creative Portal
  • Hotspot
  • Hotspot 2.0
  • WISPr

RF

Antenna Type
  • BeamFlex+ adaptive antennas with polarization diversity
  • Adaptive antenna that provides multiple unique antenna patterns per band
Antenna Gain (Max)
  • TX: 2dB
  • RX: 3-5dB
Peak Transmit Power (Aggregate across MIMO chains)
  • 18dBm for 2.4GHz
  • 22dBm for 5GHz
Minimum Receive Sensitivity
-99dBm
Frequency Bands
  • ISM 2.4-2.484GHz
  • U-NII-1 5.15-5.25GHz
  • U-NII-2A 5.25-5.35GHz
  • U-NII-2C 5.47-5.725GHz
  • U-NII-3 5.725-5.85GHz

2.4GHz Receive Sensitivity

MCS0 HT20
-99
MCS7 HT20
-74
MCS0 HT40
-89
MCS7 HT40
-73

5GHz Receive Sensitivity

MCS0 VHT20
-92
MCS7 VHT20
-74
MCS0 VHT40
-89
MCS7 VHT40
-66
MCS0 VHT80
-75
MCS7 VHT80
-62

2.4GHz Tx Power Target

MCS0 HT20
22
MCS7 HT20
19

5GHz Tx Power Target

VHT20
22
MCS0 VHT40
22
MCS7 VHT40, VHT80
19
MCS9 VHT40, VHT80
16

Performance & Capacity

Peak PHY Rates
  • 2.4GHz: 300Mbps
  • 5GHz: 867Mbps
Client Capacity
Up to 100 clients per AP
SSID
Up to 32 per AP

Ruckus Radio Management

Antenna Optimization
  • BeamFlex+
  • Polarization Diversity with Maximal Ratio Combining (PD-MRC)
Wi-Fi Channel Management
  • ChannelFly
  • Background Scan Based
Client Density Management
  • Airtime Fairness
  • Airtime-based WLAN
  • Prioritization
SmartCast Quality of Service
  • QoS-based scheduling
  • Directed Multicast
  • L2/L3/L4 ACLs
Mobility
SmartRoam
Diagnostic Tools
  • Spectrum Analysis
  • SpeedFlex

Networking

Controller Platform Support (Initial release)
  • SmartZone
  • ZoneDirector
  • Unleashed*
  • Cloud Wi-Fi
  • Standalone
Mesh
SmartMesh™ wireless meshing technology. Self-healing Mesh
IP
IPv4, IPv6
VLAN
  • 802.1Q (1 per BSSID or dynamic per use based on RADIUS)
  • VLAN Pooling
  • Port-based
802.1x
Authenticator and Supplicant
Tunnel
L2TP, GRE, soft-GRE
Policy Management Tools
  • Application Visibility and Control
  • Access Control Lists
  • Device Fingerprinting
  • Rate Limiting
Notes
* Refer to Unleashed datasheets for SKU ordering information

Physical Interfaces

Ethernet
  • 1 x 1GbE ports, RJ-45
  • 4 x 1GbE ports, one PoE-out
USB
1 USB 2.0 port, Type A

Physical Characteristics

Physical Size
  • 90mm (W) x 171mm (L), 29mm (H)
  • 3.54in (W) x 6.73in (L) x 1.14in (H)
Weight
  • 210g (0.46lbs) without bracket
  • 282g (0.62lbs) with bracket
Mounting
  • Electrical wallbox; Standard US and EU single gang wall jack
  • Optional bracket for offset & wall mount
Operating Temperature
0°C (32°F) - 40°C (104°F)
Operating Humidity
Up to 95%, non-condensing

Power Consumption

802.3af/802.3at
12.9W max

Certifications & Compliance

Wi-Fi Alliance*
  • Wi-Fi CERTIFIED™ a, b, g, n, ac
  • Passpoint®, Vantage, AMB, OCE
Standards Compliance*
  • EN 60950-1 Safety
  • EN 60601-1-2 Medical
  • EN 61000-4-2/3/5 Immunity
  • EN 50121-1 Railway EMC
  • EN 50121-4 Railway Immunity
  • IEC 61373 Railway Shock & Vibration
  • UL 2043 Plenum
  • EN 62311 Human Safety/RF Exposure
  • EN 50385 Human Safety/RF Exposure
  • WEEE & RoHS
  • ISTA 2A Transportation
Notes
  • * For complete list of WFA certifications, please see Wi-Fi Alliance website.
  • * For current certification status, please see price list

Technologie d’antennes adaptatives BeamFlex

Optimisation des performances

Ce que cela signifie :

Des antennes adaptatives compactes et intelligentes refermant plusieurs éléments manipulant les propriétés des antennes électriquement afin de créer des modèles d'antenne optimaux pour chaque appareil avec lequel elles communiquent.

En quoi cela devrait vous concerner :

Les antennes sans fil traditionnelles sont soit « omnidirectionnelles » (émettant des signaux dans toutes les directions), soit « directionnelles » (émettant des signaux dans une seule direction). La technologie d'antennes adaptatives BeamFlex de Ruckus adopte une approche plus adaptable. La technologie BeamFlex permet au système d'antennes au sein d'un point d'accès Ruckus de capter et d'optimiser les signaux de manière continue en fonction de l’environnement.

Ce système d'antennes minimise les interférences radio, le bruit et les problèmes de performances réseau et améliore le flux des applications. Résultat :

  • Des performances et une portée améliorées
  • Une vidéo et des communications vocales d'une grande clarté
  • Une économie d'énergie optimisée

BeamFlex+ est une amélioration de la technologie d'antennes adaptatives BeamFlex de Ruckus offrant un support adaptatif aux appareils mobiles. BeamFlex+ permet aux antennes de s'adapter à l'orientation et à l'emplacement des appareils clients.