T310 Series Outdoor Access Point

Outdoor 2x2:2 2.4/5GHz 802.11ac Wave 2 Wi-Fi access points with omni and directed antennae

At stadiums, transit hubs, smart cities, and other crowded outdoor public venues, users want the same fast, reliable Wi-Fi connectivity they expect in their homes or offices. For operators, however, delivering that can be immensely challenging—and expensive.

The Ruckus T310 Series of 802.11ac Wave 2 access points provides industry-leading Ruckus wireless performance in an economical, industrial-grade form factor designed for crowded outdoor locations. These ultra-lightweight, low-profile APs feature internal omni-directional or high-gain directional antennas for specific coverage, eliminating the need for bulky panel antennas and confusing and expensive external RF cabling.

Choose from either omni, 30-degree narrow beam or 120-degree sector antennas to enable fast, low-cost installation, extended range, and best-in-class throughput in the most challenging outdoor environments.

The T310d, s, n models have a USB 2.0 port to support additional RF technologies such as Bluetooth Low Energy (BLE) and optional DC power source for use with solar cell deployment.

Simplicity
Ruckus APs make Outdoor WiFi deployments extremely simple to deploy, with one-touch technologies like SmartMesh
Good Outdoor Wi-Fi
Experience high performance outdoor Wave 2 Wi-Fi with IP-67 weather proofing
Variety
One size does NOT fit all. The T310 series offers the broadest variety of APs in the market today with options of power, antenna design, and/or IoT support. All these enables customers to meet specific use cases that may not be possible with standard APs.
Stunning Wi-Fi Performance
Extends coverage with patented BeamFlex+TM adaptive antenna technology while mitigating interference by utilizing up to 64 directional antenna patterns.
Get Optimal Throughput
ChannelFly dynamic channel technology uses machine learning to automatically find the least congested channels. You always get the highest throughput the band can support.
Serve More Devices
Connect more devices simultaneously with two MU-MIMO spatial streams and concurrent dual-band 2.4/5GHz radios while enhancing non-Wave 2 device performance
Multiple Management Options
Manage the T310 Series from on-premises or remote physical/virtual appliances.
More than Wi-Fi
Enhance your network with Cloudpath security and management software, SPoT real-time Wi-Fi location engine and analytics software, and SCI network analytics.

Overview

  • Description
    Entry-level 802.11ac AP with omni, 120° or 30° directional integrated antennas
  • Maximum PHY Rate
    • 867 Mbps (5GHz)
    • 300 Mbps (2.4GHz)
  • Wi-Fi Technology
    • 802.11ac (5GHz) Wave 2
    • 802.11n (2.4GHz)
  • Concurrent Users
    512
  • Radio Chains:Streams
    2x2:2
  • Antenna Gains
    4dB
  • Max. Interference Mitigation
    10dB
  • PD-MRC
    Yes
  • Rx Sensitivity
    -101dBm
  • ChannelFly
    Yes
  • Smart Meshing
    Yes
  • USB
    Yes, for D, S, & N models
  • Ethernet Ports
    1
  • Operating Temperature
    • -20ºC (-4ºF) to 65ºC (149ºF) for C model
    • -40ºC (-40ºF) TO 65ºC (149ºF) for D, S, & N models

Wi-Fi

Wi-Fi Standards
IEEE 802.11a/b/g/n/ac Wave 2
Supported Rates
  • 802.11ac: 6.5 to 876Mbps (MCS0 to MCS9,
  • NSS = 1 to 2 for VHT20/40/80, NSS = 1 to 2 for VHT80)
  • 802.11n: 6.5 Mbps to 300Mbps (MCS0 to MCS15)
  • 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
  • 802.11b: 11, 5.5, 2 and 1 Mbps
Supported Channels
  • 2.4GHz: 1-13
  • 5GHz: 36-64, 100-144, 149-165
MIMO
  • 2x2 SU-MIMO
  • 2x2 MU-MIMO
Spatial Streams
  • 2 SU-MIMO
  • 2 MU-MIMO
Channelization
20, 40, 80MHz
Security
  • WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i, Dynamic PSK
  • WIPS/WIDS
Other Wi-Fi Features
  • WMM, Power Save, Tx Beamforming, LDPC, STBC, 802.11r/k/v
  • Hotspot, Hotspot 2.0
  • Captive Portal
  • WISPr

RF

Antenna Type
  • BeamFlex+ adaptive antennas with polarization diversity
  • Adaptive antenna that provides up to 64 unique antenna patterns per band
Antenna Gain (Max)
  • T310c and T310d – 2.4GHz: 2dBi and 5GHz: 3dBi
  • T310s – 2.4GHz: 6dBi and 5GHz: 9dBi
  • T310n – 2.4GHz: 9dBi and 5GHz: 13dBi
Peak Transmit Power (Aggregate across MIMO chains)
  • T310c and T310d – 2.4GHz: 23dBm and 5GHz: 24dBm
  • T310s – 2.4GHz: 24dBm and 5GHz: 21dBm
  • T310n – 2.4GHz: 21dBm and 5GHz: 17dBm
Minimum Receive Sensitivity*
-101dBm
Frequency Bands
  • ISM 2.4-2.484GHz
  • U-NII-1 5.15-5.25GHz
  • U-NII-2A 5.25-5.35GHz
  • U-NII-2C 5.47-5.725GHz
  • U-NII-3 5.725-5.85GHz
Notes
* Rx sensitivity varies by band, channel width and MCS rate.

2.4GHz Receive Sensitivity

MCS0 HT20
-95
MCS7 HT20
-78
MCS0 HT40
-92
MCS7 HT40
-75

5GHz Receive Sensitivity

MCS0 VHT20
-96
MCS7 VHT20
-77
MCS0 VHT40
-93
MCS7 VHT40
-74
MCS9 VHT40
-69
MCS0 VHT80
-90
MCS7 VHT80
-71
MCS9 VHT80
-66

2.4GHz Tx Power Target

MCS0 HT20
23
MCS7 HT20
18
MCS0 HT40
22
MCS7 HT40
18

5GHz Tx Power Target

MCS0 VHT20
24
MCS7 VHT20
20
MCS9 VHT20
18
MCS0 VHT40, VHT80
23
MCS7 VHT40, VHT80
20
MCS9 VHT40, VHT80
18

Performance & Capacity

Peak PHY Rates
  • 2.4GHz: 300Mbps
  • 5GHz: 867Mbps
Client Capacity
Up to 512 clients per AP
SSID
Up to 31 per AP

Ruckus Radio Management

Antenna Optimization
  • BeamFlex+
  • Polarization Diversity with Maximal Ratio Combining (PD-MRC)
Wi-Fi Channel Management
  • ChannelFly
  • Background Scan Based
Client Density Management
  • Adaptive Band Balancing
  • Client Load Balancing
  • Airtime Fairness
  • Airtime-based WLAN Prioritization
SmartCast Quality of Service
  • QoS-based scheduling
  • Directed Multicast
  • L2/L3/L4 ACLs
Mobility
SmartRoam
Diagnostic Tools
  • Spectrum Analysis
  • SpeedFlex

Networking

Controller Platform Support
  • SmartZone
  • ZoneDirector
  • Standalone
Mesh
  • SmartMesh™ wireless meshing technology
  • Self-healing Mesh
IP
IPv4, IPv6
VLAN
  • 802.1Q (1 per BSSID or dynamic per use based on RADIUS)
  • VLAN Pooling
  • Port-based
802.1x
Authenticator & Supplicant
Tunnel
L2TP, GRE, soft-GRE
Gateway & Routing
NAT/DHCP
Policy Management Tools
  • Application Visibility and Control
  • Access Control Lists
  • Device Fingerprinting
  • Rate Limiting

Physical Interfaces

Ethernet
1 x 1GbE port, RJ-45
USB
1 USB 2.0 port, Type A supported on T310d, n, and s models
DC power
12V DC Terminal Block (8V – 20V) supported on T310d, n, and s models

Physical Characteristics

Physical Size
  • T310c & d: 18.1(L) x 15.1 (W) x 7.9 (H) cm and 7.1(L) x 5.9(W) x 3.1(H) in.
  • T310s & n: 26(L) x 20.9(W) x 10.3(H) cm and 10.2(L) x 8.2(W) x 4.1(H) in.
Weight
  • T310c & d: 1kg (2.1lbs)
  • T310s & n: 1.65kg (3.6lbs)
Ingress Protection
IP-67
Mounting
  • Wall, Drop ceiling, Desk
  • Pole Mount Diameter 1” to 2.5”
Operating Temperature
  • T310c & d: -20 ºC (-40ºF) to 65ºC (149 ºF)
  • T310s & n: -40 ºC (-40ºF) to 65ºC (149 ºF)
Operating Humidity
Up to 95%, non-condensing

Power Consumption

802.3af/at (PoE)
  • T310c: 7.92W max
  • T310d: 11.86W max
  • T310s: 11.86W max
  • T310n: 11.86W max
DC
  • T310d: 11.7W max
  • T310s: 12.11W max
  • T310n: 11.7W max

Certifications & Compliance

Wi-Fi Alliance*
  • Wi-Fi CERTIFIED™ a, b, g, n, ac
  • Passpoint®, Vantage
Standards Compliance*
  • EN 60950-1 Safety
  • EN 60601-1-2 Medical
  • EN 61000-4-2/3/5 Immunity
  • EN 50121-1 Railway EMC
  • EN 50121-4 Railway Immunity
  • IEC 61373 Railway Shock & Vibration
  • UL 2043 Plenum
  • EN 62311 Human Safety/RF Exposure
  • WEEE & RoHS
  • ISTA 2A Transportation
Notes
  • * For complete list of WFA certifications, please see Wi-Fi Alliance website.
  • * For current certification status, please see price list

Selección avanzada de canales ChannelFly

Optimización del rendimiento

Qué significa:

La tecnología de administración de canales dinámicos ChannelFly en los PA de Ruckus mejora el rendimiento inalámbrico al conmutar dinámicamente un cliente a un canal mejor cuando el que está usando comienza a degradarse.

Por qué debe importarle:

La mayoría de los productos modernos para WLAN pueden cambiar el canal de un cliente cuando el que se está usando se atasca por interferencia o por la presencia de demasiados dispositivos. Pero no tiene sentido conmutar canales a menos que se sepa que el nuevo realmente proporcionará más capacidad. Y la mayoría de las estrategias de administración de canales no son buenas haciendo predicciones. La tecnología ChannelFly evalúa todos los canales disponibles para medir la mejora de capacidad en el mundo real que puede proporcionar cada uno antes de indicar al PA que conmute canales.

La tecnología ChannelFly se desarrolló inicialmente para uso en entornos de WiFi de prestadores, donde los canales están muy congestionados. Incluso en estos escenarios públicos densos, proporciona mejoras múltiples en capacidad de PA y de red en segundos, y de manera automática.

Archivos

Tecnología de antena adaptativa BeamFlex

Optimización del rendimiento

Qué significa:

Sistemas compactos e inteligentes de antenas adaptativas con varios elementos que manipulan eléctricamente las propiedades de las antenas de manera de crear patrones de antena óptimos para cada dispositivo con el que se comunican.

Por qué debe importarle:

Las antenas inalámbricas tradicionales son “omnidireccionales” (emiten señales en todas las direcciones) o “direccionales” (emiten señales en una dirección). La tecnología de antena adaptativa BeamFlex de Ruckus emplea un enfoque más adaptable. La tecnología BeamFlex permite que el sistema de antenas dentro de un PA de Ruckus detecte y se optimice continuamente para su entorno. Este sistema de antenas mitiga la interferencia de radio, el ruido y los problemas de rendimiento de red, y mejora los flujos de las aplicaciones. Los resultados son:

  • Rendimiento y rango mayores
  • Comunicaciones de video y de voz claras
  • Eficiencia energética maximizada

BeamFlex+ es una mejora de la tecnología de antena adaptativa BeamFlex de Ruckus, que brinda soporte adaptativo a dispositivos móviles. BeamFlex+ permite que las antenas se adapten a la orientación y a la ubicación de los dispositivos del cliente.